Japanese kitchen knife

Hōchō, Japanese kitchen knives in Tokyo

A Japanese kitchen knife is a type of kitchen knife used for food preparation. These knives come in many different varieties and are often made using traditional Japanese blacksmithing techniques. They can be made from stainless steel, or hagane, which is the same kind of steel used to make Japanese swords. Most knives are referred to as hōchō (Japanese: 包丁/庖丁) or the variation -bōchō in compound words (because of rendaku) but can have other names including -kiri (〜切り, lit. "-cutter"). There are four general categories used to distinguish the Japanese knife designs: handle (Western vs. Japanese); blade grind (single bevel, kataba vs. double bevel, ryōba); steel (stainless vs. carbon); and construction (laminated vs. mono-steel).

Handles

Western handles have a bolster and a full or partial tang. These handles are often heavier, but are smaller in volume and surface area than most Japanese handles. The scale materials are often synthetic or resin-cured wood and are non-porous. Chefs who prefer the feel of a Western handle enjoy a more handle-heavy balance and grip the handle closer to the blade. This allows for more weight in the cut.

Japanese handles, on the other hand are often made of ho wood which is burned in and friction-fitted to a hidden tang. A metal collar or buffalo horn bolster caps the handle-blade junction and prevents any splitting. This allows easy installation and replacement. The wood is porous and fine-grained, which makes it less likely to split and retain its grip.

More decorative woods, such as ebony, yew, cherry, or chestnut, may be made into handles, though they are heavier and often charred on the outside to improve grip and water resistance. If they are not cured well or properly cared for, these decorative woods will crack more easily when exposed to moisture.

Pak, or Pakka wood is a laminated wood that as it is held in a synthetic resin it is waterproof and is not porous. It is used on less expensive knives commonly replacing either the buffalo horn bolster, or both the bolster and the handle. The most common wood variant is chestnut.

The most common cross-sectional shape is an octagon, which is made with a slight taper towards the blade. Another common shape is the D-shape, which is an oval handle with a ridge running along the same side as the edge bevel, (right side of handle for a right-handed knife).

A chef who prefers a knife with more weight in the blade, their knife to be lighter overall, to have a larger handle, or one who wants to replace their knife handle more easily, will often turn to a Japanese handle.

Blades

(a) Kataba edge for right-hand use — (b) Ryōba double bevel edge — (c) Kataba edge for left-hand use. (The sample knife is a deba bōchō)

Single bevel knives

Traditionally, Japanese knives are single-bevel edged — kataba — and this remains the dominant style. These are the knives of the established traditional Japanese cuisine and were originally developed from the Chinese double-beveled knives.

They have an omote, (an edge on the right for right-handers); a shinogi, (where the front bevel meets the flat of the blade face); and an urasuki, (a hollow backside that releases food). These knives are usually a little thicker at the spine and body than Japanese double bevels, but are thinner right behind the edge. While they leave a better surface finish, the produce must bend further because of the thickness of the blade. They are sharpened along the single bevel by applying pressure to both the shinogi and the edge. Honbazuke is the initial sharpening that forms a flat surface along the perimeter of the urasuki strengthening it. This practice also straightens the backside and lays a shape for future sharpening. The omote is sharpened much more than the urasuki in order to maintain the function of the single bevel.

The blade tips vary in style across Japan. Kansai-style knives usually have pointed tip for vertical cuts, which helps in decorative tip work. Edo-style knives are typically shorter with a square tip used for horizontal cuts, rendering a more robust working knife.

The standard Japanese knife set, essential to Washoku (和食 Japanese cuisine), includes the yanagi-ba, deba bōchō, and usuba bōchō.

Single-bevelled knives include:

• Shobu-bōchō — 刺身— three main sashimi knifes:
  • Yanagi-ba — 柳刃 — (lit: "willow blade"). The most popular knife for cutting fish, also known as shobu-bōchō (sashimi knife). It is used to highlight different textures of fish in their techniques: hirazukuri to pull cut vertically, usuzukuri to pull cut thin vertically, and sogizukuri to pull cut at an angle. It is used to skin and sometimes scale and de-bone certain fish (for instance salmon). Yanagi-ba have angled tips and are generally heavier and have less sloping. The general blade size is from 27 to 33 centimetres (11 to 13 inches).
  • Tako-hiki — (literally: "octopus cutter") A regional variant of the yanagi-ba from Tokyo, that is lighter, thinner, flatter, and shallower in blade height with a square tip than yanagi-ba to allow easier cutting through dense flesh such as that of an octopus.
  • Fugu-hiki — (lit: "pufferfish cutter") Another regional variant of the yanagi-ba, with a thinner blade and a round tip, that is for the very careful preparation of poisonous fugu.

• Deba — 出刃 — (lit: 'pointed carver'). Thick knives with a broad slightly rounded arrow shape blade, to cut through resilient fish flesh for fillet and to cut through rib bones, behind the head, and through the head. Typically, they are between 5 to 10 millimetres (0.2 to 0.4 inches) thick depending on size. They include hon-deba (lit: "true deba"); ko-deba ("small deba"); aji-kiri (for aji); funayuki (a smaller, more pointed form for use on boats); mioroshi deba (a hybrid between deba and yanagi-ba that are intermediate in thickness, weight, and length); and yo-deba (lit: "Western-styled deba"). The smaller sizes are less thick, allowing the knife to move through flesh easily, and are much more nimble. They are still much thinner behind the edge and more fragile than a Western butchering knife. The general blade size is from 12 to 21 centimetres (4+1⁄2 to 8+1⁄2 inches).

• Usuba — 薄刃 — (lit: 'thin blade') It is the thinnest of the three general knife shapes, which utilizes a flat edge profile. A vegetable cleaver similar in shape profile to the double-bevel nakiri as well as usage. It is used for push cutting, katsuramuki (rotary cutting of thin sheets) and sengiri (cutting thin strips from those sheets). There are regional edo-usuba (square tip) and kamagata-usuba (sheep's foot tip) variants. The general blade size range is from 15 to 24 cm (6 to 9 in).

• Mukimono — Used along with usuba for vegetables and it has an angled tip for decorative vegetable cutting. The general blade size range is from 15 to 21 cm (6 to 8 in).

• Kirit-suke — A large hybrid with the length of yanagi-ba and the blade height and profile of usuba with an angled tip as a compromise. It requires great knife control because of the height, length, and flatness. The general blade size range is from 24 cm (9 in) to 30 cm (12 in).

• Hone-suki — A small triangular knife used to debone chicken. Most have an angled tip to slip between tendons and cut them. The general blade size range is from 12 to 18 cm (5 to 7 in)

• Gara-suki — A thicker version of the hone-suki, capable of cutting through chicken bones.

• Hamo-kiri — (lit: pike conger cutter). It is a knife intermediate in thickness and length between deba and yanagi-ba to cut the thin bones and flesh of pike conger. The general blade size range is from 24 cm (9 in) to 30 cm (12 in).

• Unagi-saki — 鰻裂き — (lit: "eel cutting knife") This knife comes in style variants from Kanto, Kyoto, Nagoya, and Kyushu.

• Soba-kiri — (lit: soba cutter). A large oblong knife for cutting noodles, with a udon-kiri (udon cutter) variant. The general blade size range is from 21 cm (8 in) to 30 cm (12 in).

• Mochi-kiri — (lit: mochi cutter). Used in preparation of mochi (Japanese rice cake) and comes in double-handle or single-handle variants.

• Maguro-kiri — (lit: tuna cutter). It is used to cut perpendicular (shorter) or parallel (longer and more flexible) to the very large Pacific blue-fin tuna and is sized accordingly. The general blade size range is from 40 to 150 cm (20 to 60 in), so these are not normally found in domestic kitchens.

Double bevel knives

Japan adopted French and German cutlery ideas during the Meiji period in the late 19th century, integrating them into Japanese cutting techniques and culture. Japanese knives are often flatter and lighter than their European counterparts. Traditional Western knives are made with a double bevel — ryoba — which tapers symmetrically to the cutting edge on each side. Single bevel knives, kataba, which only taper to one side (typically the right), can require more care and expertise when both using and in sharpening.

Double-bevelled knives include:

• Gyūtō bōchō — 牛刀 — (lit: "beef-knife"). This is the Japanese word, for a regular Western chef's knife, used outside of Japan, for the Japanese versions of the knife type. Used for professional Western cuisine. When preparing vegetables, it is used in the form of chopping or thrust-cutting near the heel of the knife. The gyuto is used to rock-chop stiffer produce and to make fine cuts at the tip of the knife. It is used for many different cuts of meat. For larger cuts it is used to saw back and forth. It is used to pull-cut softer meats and push-cut more muscular cuts of meat. There is usually a slope from the heel of the knife to the tip, causing the wrist to point down and the shoulder to raise when cutting. The blade size ranges from 20 cm (8 in) to 27 cm (11 in), with a shorter blade being more nimble, a longer blade giving more slicing power, and a middle length for general use.

• Santoku — 三德 — (lit: "3 virtues"). This is often translated as "three" (san) "virtues", or often (and probably more relevant for English speakers): "three-uses/purposes" derived in the 1940s from the best traits of three other Japanese knives: the deba, nakiri, and gyūtō. As a general multi-purpose utility kitchen knife, the santoku can be used for cutting meat, fish, and/or vegetables, against the more specialized knives such as the hankotsu, usuba, yaniga-ba etc. being designed for just one task. These knives are generally flatter than gyuto knives and have a less pointy tip, instead having a rounded down-turned tip, (i.e. a sheep's foot). Since they are flatter, the wrist is in a more natural position and the shoulder does not need to be raised as high. These knives do not require as much room to cut. These are the most popular knives in most Japanese homes. The general size ranges from 16 to 20 cm (6 to 8 in).

• Bunka bōchō — 文化 包丁 — (lit: "cultural kitchen knife"). This knife is a variant of the santoku, but it has a "k-tip", also called a "reverse tanto", instead of the sheep's foot tip.

• Nakiri — 菜切 — (lit: "vegetable cutter"). The square tip makes the knife feel more robust and secure than the pointed tip of the santoku or gyuto, which allows it to cut dense products at the tip. This knife has a flat edge. Some varieties of a nakiri have a slightly tilted blade profile towards the handle. This makes the grip more comfortable, causing the hand tilt up slightly and enabling one to use strength from their forearm when cutting. The general size ranges from 16 to 18 cm (6 to 7 in).

• Petty — The Japanese equivalent of a paring knife or utility knife. This is a smaller knife for paring or for smaller produce, often used to accompany the gyuto. The general sizes range from 10 to 18 centimetres (4 to 7 inches).

• Suji-hiki — 筋引 — (lit: "muscle/sinews puller"). These are long knives used to cut meat, often in the form of a draw cut. The general sizes range from 24 cm (9 in) to 30 cm (12 in).

• Hankotsu — (lit: "rebelious"). This is a boning butchering knife used for cattle to cut hanging meat from the bone with a pointed tip and a short height which allows the user to turn to cut along bone, connective tissue or fat. The general size is 15 centimetres (6 inches).

• Katsuobushi-kiri — 鰹節切 — (lit: "bonito-cutter"). This knife is used to slice thin scales of bonito or skipjack tuna (katsuobushi) in preparation to use it as an ingredient in many dishes. The blade is short, about 6.5 cm (2+1⁄2 in) in length and resembles a wood-carving knife.

• Chuka bōchō — 中華 包丁 — (lit: "China kitchen knife"). Commonly known as the Chinese chef’s knife, the chuka bōchō has a short handle, flat profile, and a tall blade used to gain mechanical advantage. The blade is usually thicker behind the edge to cut denser ingredients. Though sometimes called a "Chinese cleaver", they typically cannot cut through bones.

Steel

The defining qualities or characteristics of the metal of Japanese kitchen knives are:

• toughness — resistance to breaking
• sharpness — smallest carbide and grain for smallest apex reduce force in cutting
• edge life — an index for the length of time an edge will cut based on lack of edge rolling or chipping
• edge quality — toothy with large carbides or refined with small carbides
• ease of sharpening — steel easily abrades on stone and forms a sharp edge

Although each steel has its own chemical and structural limits and characteristics, the heat treatment and processing can bring out traits both inherent to the steel and like its opposite counterparts.

Carbon steel is generally harder and sharper, but is more brittle, less tough, and corrodes more easily, (usually with a dulling and blackening of the metallic patina).

• White steel — purified from phosphorus and sulfur and unalloyed with variants 1, 2, and 3 (from higher to lower carbon)
• Blue mokumegane steel — purified and alloyed with chromium and tungsten for edge life and toughness with variants 1 and 2
• Super-blue steel — blue steel alloyed with molybdenum and vanadium and more carbon for longer edge life, but are a little more brittle

Stainless steel is generally tougher and less likely to chip, but are more difficult to hone and so can be less sharp than carbon steel. In the highest quality though, it retains an edge longer and the grain structure is similarly sized in its carbides to carbon steel. Variants include:

• Powdered steel — with large carbides broken up by powdering process and sintered together under high pressure and temperature
• Semi-stainless steel — with less chromium that prevents rust of the iron and intermediate properties between carbon and stainless steel
• Tool steel — heavily alloyed that may or may not be stainless

Construction

Hōchō is an important element which determines the taste of Japanese cuisine.

Mono-steel blades are usually harder to sharpen and thinner than laminated blades. Three kinds of mono-steel blades are:

• Zenko — stamped out
• Honyaki — forged down from carbon steel with differential hardening
• Forged down from a billet without differential hardening

Laminated blades come in 3 different types:

• awase — meaning 'mixed', for mixed steel
• kasumi — meaning 'misty', referring to the misty look of iron after sharpening
• hon-kasumi — higher quality kasumi

Forming a laminated blade involves two or more pieces of steel, the jigane / shigane and the hagane / tamahagane. The jigane refers to soft cladding or skin of stainless steel, and hagane refers to hard cutting carbon steel core. There is sometimes an intermediate kawagane layer of a medium steel. This combination of metals makes laminated blades corrosion-resistant with the stainless steel, and strong with the high carbon steel. Blade construction with stainless steel cladding over a carbon steel core is less common due to manufacturing difficulty. The jigane allows for a tougher, more robust knife by absorbing shocks but can still be easily sharpened. It also allows for the hagane harder without making the whole blade fragile. The two forms of laminated blades are:

• Ni-mai — jigane spine with hagane blade edge
• San-mai — hagane sandwiched between jigane

A variation on the traditional laminated blade style is to form an artistic pattern in the jigane; patterns include:

• Suminagashi
• Damascus
• Kitaeji
• Mokume-gane
• Watetsu

Production

A great deal of high-quality Japanese cutlery originates from Sakai, the capital of samurai sword manufacturing since the 14th century. After the Meiji Restoration in 1868, the samurai were banned from carrying swords as part of an attempt to modernize Japan. Though a demand for military swords remained and some sword-smiths still produced traditional samurai swords as art, the majority of sword-smiths refocused their skill to cutlery production, following the cultural shift.

The production of steel knives in Sakai began in the 16th century, when tobacco was introduced to Japan by the Portuguese and Sakai craftsmen started to make knives for cutting tobacco. The Sakai knife industry received a major boost from the Tokugawa shogunate (1603–1868), which granted Sakai a special seal of approval and enhanced its reputation for quality.

Today, Seki, Gifu is considered the home of modern Japanese kitchen cutlery. Many major cutlery-making companies are based in Seki, producing kitchen knives in both the traditional Japanese style and western styles, such as the gyuto and the santoku. Knives and swords are so integral to the city that it is home to the Seki Cutlery Association, the Seki Swordsmith Museum, the Seki Outdoor Knife Show, the October Cutlery Festival, and the Cutlery Hall. Most manufacturers are small family businesses where craftsmanship is more important than volume, and they typically produce fewer than a dozen knives per day.

Design and use

(b) is angled on both sides, (a) and (c) only on one side, where (a) is for right-handed use and (c) is for left-handed use.

Unlike western knives, Japanese knives are often only single ground, meaning that they are sharpened so that only one side holds the cutting edge. As shown in the image, some Japanese knives are angled from both sides, while others are angled only from one side with the other side of the blade being flat. It was traditionally believed that a single-angled blade cuts better and makes cleaner cuts, though requiring more skill to use than a blade with a double-beveled edge. Generally, the right-hand side of the blade is angled, as most people use the knife with their right hand. Left-handed models are rare and must be specially ordered and custom made.

Since the end of World War II, western-style, double-beveled knives have gained popularity in Japan. One example of this transition is the santoku, an adaptation of gyoto. Other knives that have become widely used in Japan are the French chef's knife and the sujihiki, roughly analogous to a western carving knife. While these knives are usually sharpened symmetrically on both sides, their blades are still given Japanese-style acute-angle cutting edges of 8-10 degrees per side with a very hard temper to increase cutting ability.

Most professional Japanese cooks own their personal set of knives. After sharpening a carbon-steel knife in the evening after use, the user may let the knife "rest" for a day to restore its patina and remove any metallic odor or taste that might otherwise be passed on to the food. Some cooks choose to own two sets of knives for this reason.

Japanese knives feature subtle variations on the chisel grind. Usually, the back side of the blade (i.e. the left side, for a right-handed user) is concave to reduce drag and adhesion so the food separates more cleanly (this concave feature is known as urasuki). The kanisaki deba, used for cutting crab and other shellfish, has the grind on the opposite side (left side angled for right-handed use), so that the meat is not cut when chopping the shell.

See also

• List of Japanese cooking utensils
• Honyaki

References

• Tsuji, Shizuo, and Mary Sutherland. Japanese Cooking: A Simple Art, first edition. Tokyo: Kodansha International Ltd., 1980. ISBN 0-87011-399-2.

Further reading

• Nozaki, Hiromitsu, & Klippensteen, Kate (2009) Japanese Kitchen Knives: essential techniques and recipes. Tokyo: Kodansha International ISBN 978-4-7700-3076-4
• Tsuji, Shizuo, & Sutherland, Mary (2006) Japanese Cooking: a simple art; revised edition. Tokyo: Kodansha International ISBN 978-4-7700-3049-8